Waste Toner Auger Chute Removal - Lexmark C950 Service Manual

5058-030
Remove the three screws (H) securing the waste toner agitator motor to the machine.
15.
Remove the waste toner agitator motor.
16.

Waste toner auger chute removal

Remove the printer front door. See
1.
Remove the transfer belt cleaner. See
2.
Remove the waste toner box.
3.
4. Remove the four photoconductor units.
Remove the four toner supplies.
5.
Remove the operator panel left cover.
6.
Remove the operator panel right cover.
7.
Remove the operator panel front cover.
8.
9. Remove the printhead retract door. See
Remove the inner cover. See
10.
Remove the ATC sensor PCB bracket. See
11.
Remove the three screws (A) from the waste toner auger chute.
12.
Service Manual
4-188
"Printer front door removal" on page
"Transfer belt cleaner removal" on page
"Printhead retract door removal" on page
"Inner cover removal" on page
"ATC sensor PCB bracket removal" on page
A
4-10.
4-172.
4-139.
4-3.
Previous
Next
Go Back
4-25.