Sensor (Bridge Media Exit) Late Jam - Lexmark C950 Service Manual

5058-030

402.03 Sensor (bridge media exit) late jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (bridge media
2
exit) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (bridge media
exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (bridge media
3
exit) for proper connection.
Is the above component
properly connected?
Check the bridge drive motor for
4
proper operation.
Caution: When
performing motor
tests, ensure that all
cover and door
interlock switches
are overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch FINISHER MOTOR
TESTS.
4. Touch Bridge unit motor.
Does the above component
operate properly?
Check the bridge drive motor for
5
proper connection.
Is the above component
properly connected?
Check the bridge unit interface
6
card assembly for proper
connection.
Is the above component
properly connected?
Service Manual
2-182
Yes
Go to step 2.
Go to step 4.
Replace the sensor(bridge media
exit).
Go to
"Sensor (bridge media
exit) removal" on page 4-241.
Go to step 6.
Replace the bridge drive motor.
Go to
"Bridge drive motor
removal" on page 4-230.
Replace the bridge unit interface
card assembly.
Go to step 7.
No
Remove any media or media
fragments.
Go to step 3.
Replace the connection.
Go to step 5.
Replace the connections.
Replace the connections.
Previous
Next
Go Back