Registration/Transport Roller Assembly Removal - Lexmark C950 Service Manual

Disconnect the two cables (D).
7.
Remove the four screws (E) securing the registration drive motor to the machine.
8.
9. Remove the registration drive motor.

Registration/transport roller assembly removal

Remove the left rear lower cover. See
1.
Remove the MPF tray feeder. See
2.
3. Open the printer left duplex door assembly.
Remove the e-clip securing the rear plastic support strap to the printer left duplex door assembly.
4.
Remove the rear plastic support strap.
5.
Rotate the front plastic support strap 90 degrees and remove it from the machine.
6.
"Left rear lower cover removal" on page
"MPF tray feeder removal" on page
5058-030
4-6.
4-122.
Repair information
4-143
Previous
Next
Go Back