Sensor (Booklet Media Exit) Lag Jam - Lexmark C950 Service Manual

5058-030
Step Action and questions
Check the finisher controller card
7
assembly for proper connection.
Is the above component
properly connected?
POR the machine.
8
Does the error continue?

493.05 Sensor (booklet media exit) lag jam

Step Action and questions
Check the sensor (booklet media
1
exit) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (booklet
media exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (booklet media
2
exit) for proper connection.
Is the above component
properly connected?
Check the booklet folding/exit
3
motor for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch FINISHER MOTOR
TESTS.
4. Touch Booklet folding/exit
motor (forward).
5. Touch Booklet folding/exit
motor (reverse).
Does the above component
operate properly?
Service Manual
2-206
Yes
Go to step 8.
Replace the finisher controller
card assembly.
Go to
"Finisher PCBA removal"
on page 4-281.
Yes
Go to step 3.
Replace the sensor (booklet
media exit).
Go to
"Sensor (booklet unit
media exit) removal" on
page 4-317.
Go to step 5.
No
Replace the connections.
Problem resolved
No
Go to step 2.
Replace connections.
Go to step 4.
Previous
Next
Go Back