Sensor (Diverter Gate) Late Jam - Lexmark C950 Service Manual

5058-030
Step Action and questions
Check the finisher PCBA for
4
proper connection.
Is the above component
properly connected?
POR the machine.
5
Does the error continue?

482.03 Sensor (diverter gate) late jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (diverter gate)
2
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (diverter
gate).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (diverter gate)
3
for proper connection.
Is the above component
properly connected?
Check the buffer/transport
4
stepper motor for proper
operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch FINISHER MOTOR
TESTS.
4. Touch Buffer/transport
motor.
Does the above component
operate properly?
Service Manual
2-186
Yes
Go to Step 5.
Replace the finisher PCBA.
Go to
"Finisher PCBA removal"
on page 4-281.
Yes
Go to step 2.
Go to step 4.
Replace the sensor (diverter
gate)
Go to
"Sensor (diverter gate)
removal" on page 4-319.
Go to step 6.
No
Replace the connections.
Problem resolved
No
Remove any media or media
fragments.
Go to step 3.
Replace the connections.
Go to step 5.
Previous
Next
Go Back