Finisher Removal Procedures; Booklet Bin Assembly Removal - Lexmark C950 Service Manual

Finisher removal procedures

Booklet bin assembly removal

Disconnect booklet hookup cable assembly from the booklet bin assembly.
1.
Remove the screw securing the booklet bin assembly (A) to the finisher.
2.
Remove booklet bin assembly (A).
3.
Booklet bin hookup cable assembly removal
1. Disconnect booklet hookup cable assembly from the booklet bin assembly.
Remove rear lower cover. See
2.
Disconnect the booklet bin hookup cable assembly from the rear of the finisher.
3.
Release the clamps securing the booklet bin hookup cable assembly from the finisher.
4.
"Upper media bin front cover removal" on page
5058-030
4-353.
Repair information
4-249
Previous
Next
Go Back