Decurler Clutch Removal - Lexmark C950 Service Manual

Remove the two screws (B) securing the bridge unit top door spring you want to remove.
6.
Remove the bridge unit top door spring.
7.
Reinstallation note: Ensure that the inner guide springs are properly reinstalled.

Decurler clutch removal

Remove the bridge unit assembly. See
1.
Remove the bridge decurler rear cover. See
2.
page 4-247.
3. Release the hooks (A) securing the sensor flag to the machine.
Remove the sensor flag.
4.
"Bridge unit assembly removal" on page
"Sensor (decurler cover interlock) removal" on
5058-030
4-232.
Repair information
4-237
Previous
Next
Go Back