Remove the 8 mm bushing (E) on the front side.
13.
14.
Gently move the left side of the media eject unit assembly (G) out of the finisher followed by the right side.
Note: Do not force the media eject unit assembly out of the finisher. Remove the left side before the right
side.
Note: Tilting the media eject unit assembly slightly may make the removal easier.
Right
Remove the media eject unit assembly.
15.
Do not force the media eject unit assembly into the finisher. Insert the right side before the left side.
•
Front
G
5058-030
F
E
E-clip
Repair information
Previous
Next
Go Back
4-301