Hcf Sensor (Tray 5 Feedout) Removal - Lexmark C950 Service Manual

Release the hooks securing the sensor (HCF media tray set) (A) to the unit.
5.
6. Remove the sensor (HCF media tray set) (A).

HCF sensor (tray 5 feedout) removal

Remove the HCF unit from the printer.
1.
Remove the HCF right cover.
2.
Open the HCF top door assembly.
3.
Remove the two screws securing the bracket (B) to the unit.
4.
5. Remove the bracket (B).
Disconnect the connector from the sensor (tray 5 feedout) (A).
6.
Release the hooks securing the sensor (tray 5 feedout) (A) to the bracket (B).
7.
Connector
A
5058-030
Front
Repair information
4-373
Previous
Next
Go Back