Sensor (Media Level) Removal; Sensor (Media Out) Removal - Lexmark C950 Service Manual

Sensor (media level) removal

This removal procedure applies to trays 1–4.
Remove the appropriate feeder unit. See
1.
media feeder removal" on page
tray 3 feeder removal" on page
2. Release the tabs (A) securing the sensor (media level) to the assembly.
Remove the sensor (media level).
3.
Disconnect the harness (B).
4.

Sensor (media out) removal

This removal procedure applies to trays 1–4.
1. Remove the appropriate feeder unit. See
media feeder removal" on page
tray 3 feeder removal" on page
Remove the media out actuator. See
2.
Release the tab (A) securing the sensor (media out) to the assembly.
3.
Remove the sensor (media out).
4.
"Printer tray 1 feeder removal" on page
4-208, "TTM tray 4 media feeder removal" on page
4-217.
"Printer tray 1 feeder removal" on page
4-208, "TTM tray 4 media feeder removal" on page
4-217.
"Media out actuator removal" on page
5058-030
4-138, "Tray module
4-221, or
"TTM
4-138, "Tray module
4-221, or
"TTM
4-117.
Repair information
4-197
Previous
Next
Go Back