High Capacity Feeder (Hcf) Removals; Hcf Caster Removal; Hcf Controller Card Pcba Removal - Lexmark C950 Service Manual

High capacity feeder (HCF) removals

HCF caster removal

Remove the HCF unit from the printer.
1.
Place the machine so the HCF left cover faces down.
2.
Remove the three screws securing the HCF caster (A) to the unit.
3.
Remove the HCF caster (A).
4.

HCF controller card PCBA removal

Remove the HCF rear cover. See
1.
2. Disconnect all connectors from the HCF controller card PCBA (A).
Remove the four screws securing the HCF controller card PCBA (A) to the unit.
3.
A
"HCF rear cover removal" on page
5058-030
4-371.
Repair information
4-359
Previous
Next
Go Back