Lexmark C950 Service Manual page 783

Remove the two front screws and the two rear screws securing the bracket (C) to the finisher.
10.
Front
Remove the bracket (C).
11.
12. Release the hook from the upper media exit roll drive gear 20T(D).
Remove the upper media exit roll drive gear 20T.
13.
Remove the 6 mm bushing.
14.
Use a prying tool to remove the e-clip securing the upper media exit roll assembly (F) to the front of the
15.
finisher.
Remove the 6 mm bushing (E).
16.
Rear
B
C
Repair information
5058-030
Previous
Next
Go Back
4-355