Lexmark C950 Service Manual page 76

5058-030
3xx service errors
Error code
381.34
Service finisher error
381.35
Service finisher error
381.36
Service finisher error
381.37
Service finisher error
381.38
Service finisher error
381.39
Service finisher error
381.40
Service finisher error
381.41
Service finisher error
Service Manual
2-28
Description
Sensor (booklet rear tamper HP) lag
error
Sensor (booklet knife folding) failure
Booklet unit failure
Sensor (booklet knife HP) late error
Sensor (booklet knife HP) lag error
Booklet stapler error
Sensor (booklet compiler media
present) error
Communication error with booklet
controller card assembly
Action
The sensor (booklet rear tamper HP)
activated, but did not clear within the
specified time.
Go to
"381.34 Sensor (booklet rear
tamper HP) lag jam" on page
The sensor (booklet knife folding)
activated, but did not clear within the
specified time.
Go to
"381.35 Sensor (booklet knife
folding) failure" on page 2-169.
The booklet unit is detected as open after
power on.
Go to
"381.36 Booklet unit fail" on
page 2-170.
The sensor (booklet knife HP) activated,
but did not clear within the specified time.
Go to
"381.37 Sensor (booklet knife HP)
late jam" on page 2-171.
The sensor (booklet knife HP) activated,
but did not clear within the specified time.
Go to
"381.38 Sensor (booklet knife HP)
lag jam" on page 2-173.
The booklet stapler unit is not completely
inserted into the booklet maker unit
assembly or it has failed.
Go to
"381.39 Booklet Staple Fail" on
page 2-175.
The sensing area of the sensor (booklet
compiler no media) did not detect any
media when the booklet stapler motor was
activated.
Go to
"381.40 Sensor (booklet compiler
media present) error" on page
A communication error has occurred with
the booklet controller card assembly and
the finisher controller card assembly.
Go to
"381.41 Communication error with
booklet controller card assembly" on
page 2-177.
Previous
Next
2-167.
Go Back
2-176.