Manage Projector Setting Files; Create A Source File; Modify A Source File - Christie CP42LH User Manual

Hide thumbs Also See for CP42LH:
Table of Contents

Advertisement

Manage Projector
Setting Files
Advanced, administrator, service, or marriage permissions are required to complete the procedures
in this section.

Create a source file

Create source files to store resolution, offset, and aspect ratio settings for input devices
1. Tap Menu > Advanced Setup > Source File Setup.
2. Tap Save As.
3. Type a name for the source file in the Filename field.
4. Tap OK.
5. Enter values in these areas:
Area
Description
Resolution
The X and Y resolution of the incoming signal. For example, 2048 (X) and 858 (Y) or 1920 (X)
and 1080 (Y). The resolution must match the incoming signal format.
Offset
The amount of incoming data to discard. Set the values to zero to process all incoming data.
The allowable X range is -4096 to 4096 pixels and Y range of -2160 to 2160 pixels.
Aspect Ratio
The aspect ratio for the incoming signal. The allowable range is 0 to 7.99.
6. Tap Save.

Modify a source file

1. Tap Menu > Advanced Setup > Source File Setup.
2. Select a source file in the Current Source File list.
3. Modify the Resolution, Offset, or Aspect Ratio values.
4. Tap Save.
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
.
38

Advertisement

Table of Contents
loading

Table of Contents