Manage Projector Setting Files; Create A Source File; Modify A Source File; Create A Screen File - Christie cp2215 User Manual

Manage Projector Setting Files

Advanced, administrator, service, or marriage permissions are required to complete the procedures
in this section.

Create a Source File

Create source files to store resolution, offset, and aspect ratio settings for input devices
1. Tap Menu > Advanced Setup > Source File Setup.
2. Tap Save As.
3. Enter a name for the source file in the Filename field.
4. Tap OK.
5. Enter values in these areas:
Area
Resolution
Offset
Aspect Ratio
6. Tap Save.

Modify a Source File

1. Tap Menu > Advanced Setup > Source File Setup.
2. Select a source file in the Current Source File list.
3. Modify the Resolution, Offset, or Aspect Ratio values.
4. Tap Save.

Create a Screen File

Use screen files to define the size of the display panel and image cropping. You can assign the same
screen file to multiple input devices.
1. Tap Menu > Advanced Setup > Screen File Setup.
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)
Downloaded from ProjectorsManual.com Manuals
The X and Y resolution of the incoming signal. For example, 2048 (X) and 858
(Y) or 1920 (X) and 1080 (Y). The resolution must match the incoming signal
format.
The amount of incoming data to discard. Set the values to zero to process all
incoming data. The allowable X range is -4096 to 4096 pixels and Y range of -
2160 to 2160 pixels.
The aspect ratio for the incoming signal. The allowable range is 0 to 7.99.
Description
.
45