Manage the DLP
This section provides procedures for managing the Integrated Cinema Processor (ICP) electronics. To
access the DLP menus, you need Administrator or Service permissions.
Reset the DLP
To remove image artifacts from the screen, try resetting the DLP before restarting the projector. Do
not reset the DLP if content is playing.
1. Tap Menu > Diagnostics > DLP Management.
2. Tap Reset DLP.
3. Tap Yes.
4. Tap Acknowledge if an alarm appears.
Run a DLP Self Test
Run a DLP self test to test the functionality of the Integrated Cinema Processor (ICP) and DLP.
1. Tap Menu > Diagnostics > DLP Management.
2. Tap DLP Self Test.
3. Tap Yes.
4. Tap Clear Results to close the Results pane.
Download an ICP Certificate
1. Insert a USB flash drive in the USB port on the side of the touch panel controller (TPC). If you do
not insert a USB flash drive, the ICP certificate is saved to the FTP root directory.
2. Tap Menu > Diagnostics > DLP Management.
3. Tap Download ICP Certificate.
4. Tap Close.
Download an LD Certificate
1. Insert a USB flash drive in the USB port on the side of the touch panel controller (TPC). If you do
not insert a USB flash drive, the ICP certificate is saved to the FTP root directory.
2. Tap Menu > Diagnostics > DLP Management.
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)
35