Table of Contents
Advertisement
CF5001 Field Service Ver.1.0 Sep 2003
7. 36 MODE
7.1
Setting method
This machine is provided with the 36 mode to make
various adjustment in this mode.
A. Procedure
1. With the reset switch (SW1) left ON, turn OFF
the main switch (SW2).
2. Turn ON the SW2 while pressing the numeric
buttons 3 and 6 at the same time. The "36
mode menu screen" is shown.
At this point, the machine enters the 36 mode
with the normal copy operation unavailable.
3. Press the item key on the liquid crystal display
(LCD) to show a setting screen of each item.
4. Confirm the details of input in the setting
screen of each item.
5. Turn OFF the SW2 to release the 36 mode.
6. New data will be effective after restarting.
7.2
Process adjustment
Make various adjustments around the process.
A. Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [1. Process adjustment] key.
3. "Process adjustment mode menu screen"
For the process adjustment, there are the fol-
lowing items provided:
[1. High voltage adjustment]
[2. Drum peculiarity adjustment]
[3. Sensor output adjustment]
[4. Exclusive paper setting]
[5. Recall standard data]
4. Press the key of an item you want to adjust.
5. Press the [PREVIOUS SCREEN] key to return
from each of the adjustment screen to the
"Process adjustment menu screen."
2-51
36 MODE
Advertisement
Table of Contents
