Table of Contents
Advertisement
REGISTRATION/ADU/REVERSE/PAPER EXIT
10.7 Replacing the ADU convey-
ance clutches /1 and /2
A. Periodically replaced parts/cycle
• ADU conveyance clutch /2 (MC1):
Every 2,000,000 copies
• ADU pre-registration clutch (MC2):
Every 2,000,000 copies
B. Procedure
1. Remove the ADU release lever and the ADU
cover /L (See "7.3 Replacing the paper feed
clutch /BP").
2. Remove a relay connector [1].
3. Remove the stop ring [2] and then remove the
ADU conveyance clutch /2 (MC1) [3].
4. Remove a relay connector [4].
5. Remove the stop ring [5] and then remove the
ADU conveyance clutch /1 (MC2) [6].
6. Reinstall the above parts following the removal
steps in reverse.
Note:
• When reinstalling the MC1 and MC2, be sure
to take note of the position of the stopper.
CF5001 Field Service Ver.1.0 Sep 2003
[5]
[6]
[4]
1-110
[1]
[3]
[2]
8050ma3093
Advertisement
Table of Contents
