Replacing The Intermediate Conveyance Roller (Sponge Roller) - Konica Minolta CF5001 Service Manual

FN-9/FN120 Ver.1.0 Sep 2003
2.2 Replacing the intermediate
conveyance roller (sponge
roller)
A. Periodically replaced parts/cycle
• Intermediate conveyance roller (sponge roller):
Every 250,000 copies.
Note:
• When replacing the intermediate conveyance
rollers, all of the 2 pairs (4 components) must
be replaced.
B. Procedure
1. Open the finisher door.
2. Remove 2 screws [1] and a bearing [2], and
then remove the intermediate conveyance roller
[3].
3. With a driver inserted into the groove of the
sponge roller [1], prize it open to remove the
sponge roller.
[3]
1-167
[2]
[1]
fs2153014
[1]
fs2153015