Table of Contents
Advertisement
C-208 Ver.1.0 Sep 2003
2.3
Replacing the paper feed
roller and the feed roller
A. Periodically replaced parts/cycle
• Paper feed roller: Every 600,000 copies (Every
500,000 copies in actual replacement count)
• Feed roller: Every 600,000 copies (Every
500,000 copies in actual replacement count)
B. Procedure
1. Remove the LCT from the main body.
2. Remove the paper feed pick-up cover /B.
3. Remove the paper feed unit [1].
4. Remove the bearing [1].
5. Remove 2 stop rings [2] and then remove the
arm [3].
6. Remove the holder plate [4].
7. Remove a stop ring [5].
8. Remove the feed roller [6] and replace it with a
new one.
9. Remove the paper feed roller [7] and replace it
with a new one.
10. Reinstall the above parts following the removal
steps in reverse.
[1]
[2]
[3]
[5]
[6]
1-141
PAPER FEED
[1]
lt2113012
[7]
[4]
lt2113013
Advertisement
Table of Contents
