Table of Contents
Advertisement
36 MODE
(4) LD bias adjustment
Perform this adjustment when replacing the write
unit.
Note:
• Do not perform this adjustment except when
replacing the write unit.
a.
Procedure
1. Read the numeric value on the bar code
labeled [1] on the replacing write unit.
[1]
2. Enter the 36 mode.
3. "36 mode menu screen"
Press the [1. Process adjustment] key.
4. "Process adjustment menu screen"
Press the [2. Drum peculiarity adjustment] key.
5. "Drum peculiarity adjustment menu screen"
Press the [4. LD bias adjustment] key.
6. "LD bias adjustment Y (LS 1/1) screen"
For the LD bias adjustment, the following items
are provided. Press the arrow key to select the
color of the write unit you just replaced.
• "LD bias adjustment Y (LS 1/1)"
• "LD bias adjustment Y (LS 1/2)"
• "LD bias adjustment Y (LS 1/3)"
• "LD bias adjustment M (LS 1/1)"
• "LD bias adjustment M (LS 1/2)"
• "LD bias adjustment M (LS 1/3)"
• "LD bias adjustment C (LS 1/1)"
• "LD bias adjustment C (LS 1/2)"
• "LD bias adjustment C (LS 1/3)"
• "LD bias adjustment K (LS 1/1)"
• "LD bias adjustment K (LS 1/2)"
• "LD bias adjustment K (LS 1/3)"
7. Enter the numeric value on the bar code
labeled on the replacing write unit through the
numeric keys and press the [SET] key.
Note:
• Be sure to enter the same numeric value in
LS 1/1, LS 1/2, and LS 1/3.
8. Press the [PREVIOUS SCREEN] key to return
to the "Drum peculiarity adjustment menu
8050fs1025
screen."
2-54
CF5001 Field Service Ver.1.0 Sep 2003
Advertisement
Table of Contents
