Table of Contents
Advertisement
CF5001 Field Service Ver.1.0 Sep 2003
(5) Automatic developer charge
In this mode, after discharging developer from the
developing unit manually, a new developer is auto-
matically charged.
Note:
• Do not open the upper cover of the develop-
ing unit. Otherwise, dust gets in the unit caus-
ing image failure.
a.
Procedure
1. Open the toner supply section.
2. Remove 2 screws [1] and then remove the
developer charging plate [3] provided inside
the toner supply section [2]. Remove 2 screws
[4] and then remove the developer charging
funnel /L [5].
[2]
[1]
[3]
[5]
3. Set the developer charging plate /L [2] to the
shoulder screws [1] provided above the devel-
oping unit of a color the developer of which is
changed.
[4]
8050fs1002
2-55
36 MODE
[2]
[1]
[2]
[1]
8050fs1003
Advertisement
Table of Contents
