Table of Contents
Advertisement
CF5001 Field Service Ver.1.0 Sep 2003
Classification
Abnor-
mality
code
FN-120
F77-07
and FN-9
abnor-
mality
F77-08
F77-11
F77-12
F77-13
F77-14
F77-21
F77-22
F77-25
Causes
After the clincher rotating
motor (M704) is turned ON,
clincher rotating HP sensor
(PS714) is not turned ON or
OFF within the specified time.
After the stapler rotating motor
(M706) is turned ON, stapler
rotating HP sensor (PS713) is
not turned ON or OFF within
the specified time.
After the stapler motor /F
(M714) is turned ON, stapler
HP sensor /F (PS731) is not
turned ON within the specified
time.
After the stapler motor /R
(M709) is turned ON, stapler
HP sensor /R (PS730) is not
turned ON within the specified
time.
After the clincher motor /F
(M715) is turned ON, clincher
HP sensor /F (PS733) is not
turned ON within the specified
time.
After clincher motor /R (M710)
is turned ON, clincher HP sen-
sor /R (PS732) is not turned
ON within the specified time.
After the stopper motor (M718)
is turned ON, stopper HP sen-
sor (PS723) is not turned ON
within the specified time.
After the alignment motor /L
(M716) is turned ON, align-
ment HP sensor /L (PS724) is
not turned ON within the speci-
fied time.
After the folding knife motor
(M719) is turned ON, folding
knife HP sensor (PS722) is not
turned ON within the specified
time.
5-33
Resulting
Estimated abnormal parts
operation
Main body
FNS control board (FNSCB)
and FNS
Clincher rotation motor (M704)
stop opera-
Clincher rotation HP sensor
tion immedi-
(PS714)
ately and
main relay
FNS control board (FNSCB)
(RL1) is
Stapler rotation motor (M706)
turned OFF.
Stapler rotation HP sensor
(PS713)
FNS control board (FNSCB)
Stapler motor /F (M714)
Stapler HP sensor /F (PS731)
FNS control board (FNSCB)
Stapler motor /R (M709)
Stapler HP sensor /R (PS730)
FNS control board (FNSCB)
Clincher motor /F (M715)
Clincher HP sensor /F (PS733)
FNS control board (FNSCB)
Clincher motor /R (M710
Clincher HP sensor /R (PS732)
FNS control board (FNSCB)
Stopper motor (M718)
Stopper HP sensor (PS723)
FNS control board (FNSCB)
Alignment motor /L (M716)
Alignment HP sensor /L
(PS724)
FNS control board (FNSCB)
Folding knife motor (M719)
Folding knife HP sensor
(PS722)
ERROR CODE LIST
Advertisement
Table of Contents
