Table of Contents
Advertisement
CF5001 Field Service Ver.1.0 Sep 2003
(6) L-detect initial automatic adjustment
Be sure to conduct this adjustment after a new
developer is charged.
Note:
• Do not print without conducting the L-detect
initial auto. adjustment. Otherwise, a proper
image density cannot be obtained, thus
resulting in the change of developer again.
a.
Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [1. Process adjustment] key.
3. "Process adjustment menu screen"
Press the [2. Drum peculiarity adjustment] key.
4. "Drum peculiarity adjustment menu screen"
Press the [6. L-detect initial auto. adjustment]
key.
5. "L-detect initial auto. adj. ALL screen"
Press the arrow key to select the color of a
developer that has been newly charged, and
then press the [Start] key.
For the L-detect initial auto. adj., the following
items are provided:
• L-detect initial auto. adj. All: Conduct all colors
of Y, M,C and K.
• L-detect initial auto. adj. YMC: Conduct Y, M
and C only.
• L-detect initial auto. adj. K: Conduct K only.
• L-detect initial auto. adj. Y: Conduct Y only.
• L-detect initial auto. adj. M: Conduct M only.
• L-detect initial auto. adj. C: Conduct C only.
6. A message "Completed" is displayed.
7. Press the [PREVIOUS SCREEN] key to return
to the "Drum peculiarity adjustment menu
screen."
(7) Initial drum rotation
When remove the drum cartridge, be sure to con-
duct this operation to securely set the drum cou-
pling.
a.
Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [1. Process adjustment] key.
3. "Process adjustment menu screen"
Press the [2. Drum peculiarity adjustment] key.
4. "Drum peculiarity adjustment menu screen"
Press the [7. Initial drum rotation] key.
5. "Initial drum rotation screen"
Press the [Start] key. This process completes
in about 10 seconds and complete message is
shown on the screen.
6. Press the [PREVIOUS SCREEN] key to return
to the "Drum peculiarity adjustment menu
screen."
2-57
36 MODE
Advertisement
Table of Contents
