Main Tray; Replacing The Tray Up/Down Motor - Konica Minolta CF5001 Service Manual

3. MAIN TRAY

3.1 Replacing the tray up/down
motor
Caution:
• When removing the tray up/down motor, be
sure to hold the main tray to prevent it from
falling.
A. Periodically replaced parts/cycle
• Tray up/down motor (M703): Every 2,500,000
copies
B. Procedure
1. Remove the rear cover.
2. After removing a connector [1], remove 2 screws
[3] while supporting the main tray [2] with your
hand, and then remove the tray up/down motor
(M703) [4].
3. Reinstall the above parts following the removal
steps in reverse.
[3]
[4]
[1]
1-170
FN-9/FN120 Ver.1.0 Sep 2003
[2]
fs2153020