Table of Contents
Advertisement
MAIL REMOTE NOTIFICATION SYSTEM
d. To receive multiple data list
Data lists in reply to GETLOG command are separately returned by mails; one list per mail. If the
same list is requested twice or more in a mail, the list is returned only once.
When followings are described in a mail, both counter list mail and machine management list 1 mail
are returned.
[GetLog Counter]
[GetLog Management]
When the commands are written in one line continuously, Management (the later command) is ignored
and only counter list (the first command) is returned.
[GetLog Counter Management]
e.
When unrecognizable option is specified.
Sending mail
[GetLog Log]
Returned mail
[Option Not Found → GetLog Log]
(2) Send CHPASS command
The sending mail password described on the subject can be changed remotely. Specify 20 or less let-
ters to [OldPasswd] and [NewPasswd]. Use ASCII characters except space.
Password cannot be changed by mail if you don't remember the old password. Change the [CE pass-
word] from the browser, explained in Chapter 2.
a.
Example of correct password change
In this case, old password [U-BIX] is changed to new password [Sitios].
Sending mail
[ChPass U-BIX Sitios]
Returned mail
[SE's Password was changed successfully. → New Password [Sitios]]
When the password is changed, use [NewPasswd] from the next mail. When the mail is sent with [Old-
Passwd], it is treated as illegal mail.
b. Example of invalid password change
Old password [U-BIX] is changed to new password [Sitios].
Sending mail
[ChPass Sitios U-BIX]
Returned mail
[Old Password is Invalid. → ChPass Sitios U-BIX]
Then, password was not changed. Accordingly, the password is unchanged and [U-BIX].
Sending mail
[ChPass Sitios]
Returned mail
[Violation on format by new password. → ChPass Sitios]
When the new password is blank, password is not changed.
CF5001 Field Service Ver.1.0 Sep 2003
3-58
Advertisement
Table of Contents
