Cover Inserter D Ver.1.0 Sep 2003
Cover Inserter D DISASSEMBLY/ASSEMBLY
Caution:
• Make sure the power cord of the copier is
unplugged from the power outlet before dis-
assembly or assembly.
1. External Section
1.1
Removing / Re-installing the
External covers
A. Procedure
1. Remove cap on the top cover.
2. Remove four screws to detach the top cover.
3. Remove one screw to detach the connector
cover.
4. Remove three screws to detach the lower cover.
Top cover
Lower cover
Screw
1-189
External Section
Screws
Cap
Screws
Connecting cover