Error Code List - Konica Minolta CF5001 Service Manual

CF5001 Field Service Ver.1.0 Sep 2003

2. ERROR CODE LIST

Note:
• In the F code area of warning codes, "Contact the Service Section" is indicated and in the E
code area, "Turn ON the power switch again" is indicated. On the actual LCD screen, all the indi-
cations are SC codes.
Classification Abnor-
mality
code
Commu- F10-10
nication
abnor-
mality
Paper F13-01
feed
motor
abnor-
mality
LT paper F13-02
feed
motor
abnor-
mality
Paper F18-01
feed tray
abnor-
mality
F18-02
F18-03
F18-04
LT up/ F18-50
down
motor
abnor-
mality
Causes
Communication abnormality
between printer control board
(PRCB) and LT drive board
(LTDB)
M41 abnormality detection sig-
nal was continuoudly detected
for the specified time when the
paper feed motor (M41) was
ON.
M101 abnormality detection
signal was continuously
detected for the specified time
when the paper feed motor
(M101) was ON.
After the tray up/down motor /l
(M40) is turned ON, tray upper
limit sensor /1 (PS30) is not
turned ON.
After the tray up/down motor /2
(M39) is turned ON, tray upper
limit sensor /2 (PS38) is not
turned ON.
After the tray up/down motor /3
(M38) is turned ON, tray upper
limit sensor /3 (PS42) is not
turned ON.
After the tray up/down motor /
BP (M35) is turned ON, the
tray upper limit sensor /BP
(PS25) is not turned ON within
the specified time.
When the up/down motor
(M100) was ON, M100 abnor-
mality detection signal was
continuously detected for the
specified time.
5-11
Resulting Estimated abnormal parts
operation
Main body Printer control board (PRCB)
stops imme- LT drive board (LTDB)
diately and
main relay
(RL1) is
Printer control board (PRCB)
turned OFF.
Paper feed motor (M41)
LT drive motor (LTDB)
Paper feed motor (M101)
Printer control board (PRCB)
Tray up/down motor /1 (M40)
Tray upper limit sensor /1
(PS30)
Printer control board (PRCB)
Tray upper limit motor /2 (M39)
Tray upper limit sensor /2
(PS38)
Printer control board (PRCB)
Tray upper limit motor /3 (M38)
Tray upper limit sensor /3
(PS42)
Conveyance drive board
(CVDB)
Tray up/down motor /BP (M35)
Tray upper limit sensor /BP
(PS25)
Main body LT drive board (LTDB)
stops imme- UP/DOWN motor (M100)
diately and
main relay
(RL1) is
turned OFF.
ERROR CODE LIST