Table of Contents
Advertisement
CF5001 Field Service Ver.1.0 Sep 2003
• When reinstalling it to the fixing unit, be sure
to press it against the paper exit side [2] hori-
zontally while being careful that the paper
entrance prevention plate [1] does not get in
touch with the roller. This is because the
paper entrance prevention plate may cause
damage to the roller.
4. Reinstall the above parts following the removal
steps in reverse.
Note:
• After replacing the fixing cleaning unit, be
sure to reset the count of the fixing cleaning
unit in accordance with the 25 mode "Parts
counter - Count of special parts."
If not, a problem such as image smudge may
arise because the web feed amount becomes
less than the set value or the machine dis-
plays the message "The fixing cleaning unit is
require to be replaced. Contact the service
manager or the authorized distributor" and is
disabled to copy or print.
[2]
1-99
FIXING
[1]
8050ma3158
Advertisement
Table of Contents
