Table of Contents
Advertisement
25 MODE
6.8
Password setting
Set the following passwords.
• Key operator password (4 digits): Password used
to enter the key operator mode.
• EKC master key code (8 digits): Password
required when entering various EKC setting
modes.
• Weekly timer password (4 digits): Password
required when entering various weekly timer set-
ting modes.
Note:
•A password can be set only when the setting
for use of the weekly timer is set to "Use" in
the key operator mode.
A. Procedure
1. Enter the 25 mode.
2. "25 mode menu screen"
Press the [6. Password setting] key.
3. "Password setting mode screen"
Press the key of an item you want to set.
• Key operator password (4 digits)
• EKC master key code (8 digits)
• Weekly timer password (4 digits)
4. Enter a new password through the numeric
keys.
5. Press the [OK] key to update the data.
To invalidate the setting that you have
changed, press the [CANCEL] key.
Note:
• Setting "0000" for the key operator password
and the weekly timer password allows you to
use each mode with no password.
CF5001 Field Service Ver.1.0 Sep 2003
6.9
Telephone number setting
Set the customer support center telephone and
FAX numbers that are used in an emergency for a
service call and shown on the basic screen for help.
A. Procedure
1. Enter the 25 mode.
2. "25 mode menu screen"
Press the [7. Telephone number setting] key.
3. "Customer support TEL/FAX setting screen"
Press either of the [Service centre Telephone
number (16 digits)] and [Service centre FAX
number (16)] keys that you want to set.
4. Enter a TEL or FAX number through the
numeric keys.
5. Press the [OK] key to update the data.
To invalidate the setting that you have
changed, press the [CANCEL] key.
Note:
• When a number is less than 16 digits, be sure
to use hyphens to fill up the blanks.
2-48
Advertisement
Table of Contents
