Table of Contents
Advertisement
CF5001 Field Service Ver.1.0 Sep 2003
10.3 Replacing
discharging plate unit
A. Periodically replaced parts/cycle
• Separation discharging plate unit: Every 100,000
copies
B. Procedure
1. Open the toner supply section. (See "5.1 Open-
ing and closing the toner supply section.")
2. Pull out the ADU. (See "10.1 Removing and
reinstalling the ADU.")
3. Remove the fixing unit. (See "9.2 Removing and
reinstalling the fixing unit.")
4. Remove 2 screws [1] and remove the transfer
release cover.
5. Remove 2 separation fitting screws [2].
6. Raise the separation discharging plate unit [2]
once, remove a faston [3] and then remove the
separation discharging plate unit [2].
Note:
• When removing the faston from the separa-
tion discharging plate unit, be sure to pull out
straight the faston cover section.
7. Reinstall the above parts following the removal
steps in reverse.
Note:
• When reinstalling the separation discharging
plate unit, be sure to fasten in advance the
separation fitting screw on the front side for
positioning.
the
separation
1-105
REGISTRATION/ADU/REVERSE/PAPER EXIT
[2]
[1]
[2]
[1]
8050ma3176
[3]
8050ma3088
Advertisement
Table of Contents
