Konica Minolta CF5001 Service Manual page 499

CF5001 Field Service Ver.1.0 Sep 2003
Classifi- Jam
cation code
FN-120 J72-83
FN-9
J72-90
J73-01
J73-02
J73-05
J73-07
J73-08
J73-09
J73-10
TMG-3 J73-11
J73-12
J73-13
Cover J73-14
Inserter
D
J73-17
ADU J92-01
ADU J92-11
Causes
After the stapler motor /F, /R (M714),
M709), and clincher motor /F, /R (M715,
M710) are turned ON, stapler HP sen-
sor /F, /R (PS731, PS730) and clincher
HP sensor /F, /R (PS733, PS732) are
not turned ON within the specified time.
After operation stop signal is transmit-
ted from the main body to FNS, FNS
does not stop within the specified time.
Main tray paper exit sensor (PS706) is
ON in the idling condition.
Stacker inlet sensor (PS705) is ON in
the idling condition.
FNS inlet sensor (PS704) is ON in the
idling condition.
Sub-tray paper exit sensor (PS701) is
ON in the idling condition.
Stacker no-paper sensor (PS720) is
ON in the idling condition.
Folding passage sensor (PS726) is ON
in the idling condition.
Folding paper exit sensor (PS725) is
ON in the idling condition.
Inlet sensor (PS101) is ON in the idling
condition.
Conveyance sensor (PS102) is ON in
the idling condition.
Paper exit sensor (PS108) is ON in the
idling condition.
PI passage sensor (PS206) is ON in
the idling condition.
PI passage sensor /U (PS201) is ON in
the idling condition.
After the reverse paper exit sensor
(PS19) is turned ON, ADU reverse sen-
sor (PS21) is not turned ON within the
specified time.
ADU reverse sensor (PS21) is ON in
the idling condition.
Resulting
operation
FNS/main body
stop immedi-
ately.
—
Printer section
stops immedi-
ately.
—
5-9
JAM CODE LIST
Correction
Remove jammed
paper in the FNS/main
body, if any.
Open the FNS front
door and remove
jammed paper, if any.
Remove jammed
paper in the sub-tray, if
any.
Open the FNS front
door and remove
jammed paper, if any.
Open the TU front
door and remove
jammed paper, if any.
Remove paper from
the cover sheet feeder
/L and remove
jammed paper, if any.
Remove paper in the
cover sheet feeder /U
once and remove
jammed paper, if any.
Pull out ADU and
remove jammed
paper, if any.
Pull out ADU and
remove jammed
paper, if any.