Disassembly/Assembly; Punch Section; Replacing The Punch Unit - Konica Minolta CF5001 Service Manual

PK-5 Ver.1.0 Sep 2003
PK-5 DISASSEMBLY/ASSEMBLY
Caution:
• Make sure the power cord of the copier is
unplugged from the power outlet before dis-
assembly or assembly.

1. PUNCH SECTION

Note:
• The following screws should not be removed.
If you do, punching cannot be done as
designed.
1.1

Replacing the Punch unit

A. Procedure
1. Remove cap on the top cover.
Screws that should
not be removed
Punch scraps box
1-185
PUNCH SECTION
Punch unit