Table of Contents
Advertisement
Recommended Advanced Parameter Settings for RTK
Remote Stations
There are many parameters that control the operation of the receiver. Most should be
left at default values. The following settings are recommended for RTK Remote
Stations.
Base Station RTCM Data
Both Differential remote stations and RTK remote stations automatically extract the
messages needed from the data coming in to the designated serial port. So you can set
up a combined Differential/RTK base station (see See "Setting Up a Combined
Differential and RTK Base Station" on page 47.), and operate DGPS remote
receivers, DGG remote receivers and RTK remote receivers.
56
$PASHS,CRR,E
$PASHS,LPS,10,3,1 (for high dynamic or high vibration applications)
Other parameter settings at factory default.
GG Surveyor GPS+GLONASS Reference Manual
Advertisement
Table of Contents
