Table of Contents
Advertisement
Number
8
Table 2.1: GG Surveyor Front Panel Description (continued)
Component
3
Antenna Connector
4
On/Off Switch
5
Power Indicator/SV
Indicator
6
Serial Power/I/O Port
Function
The RF connector is a standard TNC-type female
receptacle wired for connection via 50 Ω coaxial
cabling to a GPS+GLONASS antenna with an
integral LNA.
Turns the receiver on and off.
Flashing red light indicates power is applied to the
receiver. Number of green flashes indicates number
of satellites the receiver is locked onto. A yellow
flash separates the count between the number of
GPS and GLONASS satellites the receiver is locked
onto.
The multi-function 25 pin connector serves as the 3
RS-232 Serial input/output ports (ports A, B, and C).
The power input and event marker input, and the
1PPS output.
GG Surveyor GPS+GLONASS Reference Manual
Advertisement
Table of Contents
