Table of Contents
Advertisement
Item
54
empty field
empty field
41
38
empty field
empty field
42
51
48
empty field
01.8
01.0
01.5
AB
GSN: Signal Strength/Satellite Number Message
$PASHS,NME,GSN,x,s
Enable/disable the signal strength/satellite number response message on port x, where
x is the output port, and s is ON or OFF. This message outputs even if a position is not
computed.
Example: Enable GSN message on port B
$PASHQ,GSN,x
The associated query command is $PASHQ,GSN,x, where x is the optional output
port.
Example: Output GSN message on port B
Command/Response Formats
Table 6.54: Typical GLGSA Response Message (continued)
Satellite 54 used for position computation
No locked satellite in this channel or locked satellite not used
No locked satellite in this channel or locked satellite not used
Satellite 41 used
Satellite 38 used
No locked satellite in this channel or locked satellite not used in position
solution
As above
Satellite 42 used
Satellite 51 used
Satellite 48 used
No locked satellite in this channel or locked satellite not used in position
solution
PDOP = 1.8
HDOP = 1.0
VDOP = 1.5
Message checksum in hexadecimal
$PASHS,NME,GSN,B,ON
$PASHQ,GSN,B
Significance
143
Advertisement
Table of Contents
