Ini: Receiver Initialization - ashtech GG Surveyor Reference Manual

Return
Parameter
d24
*cc

INI: Receiver Initialization

$PASHS,INI,x1,x2,x3,x4,z
Reset receiver memory and serial port baud rates, where x1 through x4 are the codes
for baud rate settings for ports A through D respectively (see $PASHS,SPD command
for code), and z is the memory reset code defined in Table 6.15.
Example: Reset baud rate of ports A, B, C, and D to 9600 baud and reset internal and
external memory.
ION: Set Ionospheric Models
$PASHS,ION,x
Exclude or include the ionospheric and tropospheric models from the position
computation, where x = N (exclude) or Y (include). Default is N (exclude).
Example: Include ionospheric and tropospheric models
$PASHQ,ION,x
Query current ionospheric data information, where x is the port through which the
response message should be output. Note that x is not required to direct the response
message to the current communication port.
Command/Response Formats
Table 6.14: INF Response Structure (continued)
Barometric pressure after data collection
Checksum
Table 6.15: Reset Memory Codes
Reset Memory Code z
0
1
2
3
$PASHS,INI,5,5,5,5,3
$PASHS,ION,Y
Description
Action
No memory reset
Reset internal memory
Reset external memory (data storage)
Reset internal and external memory.
Range
0 - 9999
89