Table of Contents
Advertisement
FCC Notice
The equipment described in this manual has been tested pursuant to Part 15 of the
FCC Rules and found to comply with the limits for a Class A digital device for use in
commercial business, and industrial environments. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial
environment. The equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio and television reception. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
If this equipment does cause interference to radio or television reception, which can
be determined by turning the equipment off and on, you can try to correct the
interference by one or more of the following measures:
•
Reorient the receiving antenna.
•
Relocate the receiver relative to the equipment which it interferes.
•
Power the equipment from a different AC receptacle so that this
equipment and the interfered equipment are on different branch circuits.
If necessary, contact the Ashtech customer service department or an
authorized representative for additional advice.
iii
Advertisement
Table of Contents
