Table of Contents
Advertisement
ZDA: Time and Date Message
$PASHS,NME,ZDA,x,c
Enable/disable the time and date message or port x, where x is the output port, and c is
ON or OFF. This message is output even if a position is not computed.
Example: Disable ZDA message on port A
$PASHQ,ZDA,x
The associated query command is $PASHQ,ZDA,x , where x is the optional output
port.
$GPZDA
The response message is in the form:
Table 6.88 outlines the ZDA structure.
Field
m1
d1
d2
d3
d4
d5
Example:
174
Table 6.87: Typical VTG Response Message (continued)
Item
K
3E
$PASHS,NME,ZDA,A,OFF
$GPZDA,m1,d1,d2,d4,d5
Table 6.88: ZDA Structure
UTC time (hhmmss.ss) (hours, minutes, seconds)
Current day 01 - 31
Current month 01 - 12
Current year 0000-9999
Local zone offset from UTC time where s = sign and hh = hours Range 00 - ±13
Local zone offset from UTC time where mm = minutes with same sign as shh
Query: $PASHQ,ZDA,A or
Set: $PASHS,NME,ZDA,A,ON
Typical Response: $GPZDA,132123.00,10,03,1996,+07,00*ss
Description
Kilometers/hour marker
Message checksum in hexadecimal
Description
GG Surveyor GPS+GLONASS Reference Manual
Advertisement
Table of Contents
