Table 4.3: Survey Status Information; Table 4.4: Time Displays - ashtech Z-Surveyor Operation And Reference Manual

STATIC
•
•
•
Menu Item
Current Position
Position Dilution
of Precision
#Satellites
recorded (on L1
and L2)
Time
KINEMATIC
•
48
SITE (SITE:****)
Sets the four character SITE name.
Antenna Height (ANT HT:**.****m)
Sets the height of the GPS antenna
Survey Status (STATUS)
is a submenu with the information described in Table 4.3:
STATUS

Table 4.3: Survey Status Information

Description
LAT:N/S**º**'**.*****"
LON:E/W***º**'**.*****"
ALT:*****.**m
PDOP: **.*
#USED: **
CNT/GPS/UTC **:**:**

Table 4.4: Time Displays

Time
CNT Time of the receiver's internal clock. Displayed until receiver locks to first
satellite.
GPS Time displayed after receiver locks to first satellite.
UTC Time displayed after receiver collects UTC corrections from satellite.
SITE (SITE:****)
Sets the four character SITE name.
• Epoch Log counter (LOG #:***)
If the epoch counter in the SURVCONF menu has been set to a value
other than 0 and the SITE has been entered (which must be done after
the user has set the antenna on the desired point), the display enters the
LOG # screen and the log counter begins decrementing starting from the
Description
The position displayed is the autonomous
position or the RTCM code differential
position, but not the RTK or CPD position.
Displays PDOP of current constellation used
for position solution.
Number of satellites being recorded on
PCMCIA card (healthy and above the
recording elevation mask).
Displays current time. Table 4.4 describes the
different types of time the receiver can
display.
Description
Z-Surveyor & Z-FX Operation Manual