Static; Table 4.3 Survey Status Information; Table 4.4 Time Parameters - ashtech Z-Xtreme Operations & Reference Manual

dependent on the type of survey being conducted. There are three modes:

STATIC

KINEMATIC
RTK BASE
The display shows only the items that are significant for the mode selected. The
mode is selected through the
STATIC
• SITE (SITE:****)
Sets the four-character SITE name.
• Antenna Height (ANT HT:**.****m)
Sets the height of the GPS antenna
• Survey Status (STATUS)
is a submenu with the information described in Table 4.3.
STATUS
Menu Item
Current Position
Position Dilution of Precision
#Satellites recorded (on L1 and L2)
Time
Time
CNT Time of the receiver's internal clock. Displayed until receiver locks to first
satellite.
GPS Time displayed after receiver locks to first satellite.
UTC Time displayed after receiver collects UTC corrections from satellite.
34
main menu.
SURVCONF

Table 4.3 Survey Status Information

Indication
LAT:N/S**º**'**.*****"
LON:E/W***º**'**.*****"
ALT:*****.**m
PDOP: **.*
#USED: **
CNT/GPS/UTC **:**:**

Table 4.4 Time Parameters

Description
Z-Xtreme Operations and Reference Manual
Description
The position displayed is the
autonomous position or the RTCM
code differential position, but not the
RTK or CPD position.
Displays PDOP of current
constellation used for position
solution.
Number of satellites being recorded
on PCMCIA card (healthy and above
the recording elevation mask).
Displays current time. Table 4.4
describes the different types of time
the receiver can display.