First-Time Use; Unpacking; Inserting The Battery Into The Receiver - ashtech MobileMapper 10 Getting Started Manual

First-Time Use

Unpacking

Inserting the
Battery Into the
Receiver
Open the receiver box and unpack the following items:
• Receiver
• Battery
• Universal AC adapter
• USB cable
• Back strap
• Lanyard
• Stylus
Follow the instructions below:
• Turn over the receiver.
• Using a coin, rotate the two screws to open the trap door:
turn the left-hand one clockwise by a quarter turn, and the
right-hand one anticlockwise, also by a quarter turn.
• Pull the trap door open.
• Insert the battery as shown. Orientate the battery so that
its electric contacts can come into contact with those in
the battery compartment. Insert the upper part of the
battery first, as shown, then push the battery in.
• Put the trap door back into place by first inserting the two
lugs located at the bottom of the trap door.
1