Factory Five Racing Mk3 Roadster Assembly Manual page 69

15. Position the front wall with self-tapping screws.
16. Mark where the rivets will go, remove the panel and apply silicone to the panels.
17. Rivet the panel in place.
18. Position the outside wall with self-tapping screws.
19. Mark where the rivets will go, remove the panel and apply silicone to the panels.
20. Install the outer wall and drill and rivet the panel into place. The entire passenger foot box should now
be complete. With both foot boxes complete, use silicone to seal any holes and around each seat
harness mount.
Passenger inside wall assembled
Passenger side foot box.
69
www.factoryfive.com 508-291-3443
.