Factory Five Racing Mk3 Roadster Assembly Manual page 254

5. Tighten the rear differential bolts.
6. Fill the differential with 3.25 pints Gear oil and 4oz. Friction modifier.
• Lower Control Arm Installation
1. Screw the Jam nuts all the way onto the Rod Ends.
2. Screw the Rod Ends into the lower arms so that there is only ½" total of thread (including the Jam
nut) sticking out of the arms.
3. Attach the lower arms to the cage using the supplied ⅝" fasteners. Attach the front lower mount first
using an equal number of shims on either side of the rod end.
4. Attach the rear mount using only as many shims as will fit without being forced into place on either
side of the rod end. As the alignment changes the number of shims per side will change as well.
5. The shock mount should be toward the back of the car and under the arm.
½" of threads sticking out of arm.
254
www.factoryfive.com 508-291-3443