Factory Five Racing Mk3 Roadster Assembly Manual page 80

1. If you are using a TKO transmission, the rear of the transmission needs to be modified. The rear of
the transmission needs to be trimmed to fit over the 4" crossmember. The mount hanging off the
bottom of the housing is for a torque arm and must be trimmed off level as shown in the picture.
NOTE: If you are using a TKO transmission, two ¾" spacers need to be used between the mount and the
transmission, which raises the entire assembly ¾".
2. Using the T-5 or TKO style transmissions, bolt the transmission mount to the top of the frame mount
with the fasteners provided. The ½" bolts are used in the back and the ⅜" in the front.
Tremec housing with torque arm mount
Torque arm mount removed for crossmember clearance
80
www.factoryfive.com 508-291-3443