Factory Five Racing Mk3 Roadster Assembly Manual page 122

.
Top hood pin plate ready for drilling and riveting
2. Bolt the top mounting plates to the side mounting plates. (Be sure to line the top plate with the front
¾" tube.
.
Top hood pin plate mounted to side plate
3. Drill a / hole in the front ¾" tube.
3
16
4. Rivet the plate to the front ¾" tube.
L-Shaped Hood Handles
TOOLS: Drill, ⅛"drill bit, / " hole saw, Phillips head screwdriver, small hex key set, small square file,
7
8
hack saw, masking tape.
PARTS: Three lock set and fasteners (FFR# 11019), hood/trunk fasteners (FFR# 10646).
122
www.factoryfive.com 508-291-3443