ATTENTION: Handle the windshield with care. This piece costs close to $645. Store in a safe place.
Use Caution while installing the screws into the windshield, they strip the brass strip very
easily. Be careful to use the correct screws (the ones from the wind wings and sun visors are
longer and can break the windshield if used in the wrong place).
TOOLS: ¾" combination wrench, ¾" deep socket, small regular screw driver, small hex key set, drill,
½" drill bit, hack-saw, marker and ruler.
PARTS: Windshield/Fasteners (FFR# 10895).
1. Carefully mount the sidebars on the windshield, with the included screws, using a small flat head
screwdriver. Start all of the screws before tightening them.
2. With the help of another person, lower the windshield into the slots that were previously cut in the
body.
Underside view of installed fuel filler neck extension.
Windscreen
140
www.factoryfive.com
508-291-3443