Factory Five Racing Mk3 Roadster Assembly Manual page 251

• Rotors
Once the spindles have been re-drilled, the rotors must be made to fit the new lug pattern. The easiest
way to do this is using a Dremel tool or grinder to oval out the existing stud holes. Mustang 5 lug rotors
can not be used as they have a different wheel mount surface to rotor surface distance.
Wheel Stud holes elongated
• Brake Calipers
Unpack the included parking brake cables and find the smooth end of the cable (the end without the built
in retaining barbs) and try in insert it into the bracket on the caliper. If necessary, use a screwdriver and
bend the bracket until the cable end fits.
E-brake cable holder on caliper with cable sleeve inside
X. Installation
251
www.factoryfive.com 508-291-3443