Changing The Fax Resolution; Adjusting The Fax Darkness; Printing A Fax Log; Blocking Junk Faxes - Lexmark MX826 User Manual

Faxing

Changing the fax resolution

Note: Make sure that fax is configured. For more information, see
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Fax, and then enter the needed information.
3
Touch Resolution, and then adjust the setting.
4
Send the fax.

Adjusting the fax darkness

Note: Make sure that fax is configured. For more information, see
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Fax, and then enter the needed information.
3
Touch Darkness, and then adjust the setting.
4
Send the fax.

Printing a fax log

Note: Make sure that fax is configured. For more information, see
1
From the home screen, touch Settings > Reports > Fax.
2
Touch Fax Job Log or Fax Call Log.

Blocking junk faxes

Note: Make sure that fax is configured. For more information, see
1
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
2
Set Block No Name Fax to On.

Holding faxes

Note: Make sure that fax is configured. For more information, see
1
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes.
2
Select a mode.
"Setting up the printer to fax" on page
"Setting up the printer to fax" on page
"Setting up the printer to fax" on page
"Setting up the printer to fax" on page
"Setting up the printer to fax" on page
74
64.
64.
64.
64.
64.