Adjusting The Fax Darkness; Printing A Fax Log; Blocking Junk Faxes; Holding Faxes - Lexmark XM7355 User Manual

Faxing

Adjusting the fax darkness

Note: Make sure that fax is configured. For more information, see
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Fax, and then enter the needed information.
3
Touch Darkness, and then adjust the setting.
4
Send the fax.

Printing a fax log

Note: Make sure that fax is configured. For more information, see
1
From the home screen, touch Settings > Reports > Fax.
2
Touch Fax Job Log or Fax Call Log.

Blocking junk faxes

Note: Make sure that fax is configured. For more information, see
1
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
2
Set Block No Name Fax to On.

Holding faxes

Note: Make sure that fax is configured. For more information, see
1
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes.
2
Select a mode.

Forwarding a fax

Note: Make sure that fax is configured. For more information, see
1
Create a destination shortcut.
a
From the home screen, touch Shortcut Center.
Note: The icon and name may have been changed. For more information, contact your administrator.
b
Select a printer function, and then touch Create Shortcut.
c
Configure the settings, and then touch Save.
d
Type a unique shortcut name.
e
Touch OK.
Note: Take note of the shortcut number.
2
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
"Setting up the printer to fax" on page
"Setting up the printer to fax" on page
"Setting up the printer to fax" on page
"Setting up the printer to fax" on page
"Setting up the printer to fax" on page
74
64.
64.
64.
64.
64.